 |
Network Port C |
 |
| Serial to Ethernet Connector 3.0 |
|
This is software-based solution that lets you share up to 255 serial port devices over TCP/IP network. So, any serial port device connected to COM port could be accessed from anywhere as if it is attached to local PC. It provides the ability to create three different types of connection: Port-to-port, Port-to-TCP client and Port-to-TCP server. Serial to Ethernet Connector uses virtual port technology which emulates real serial ports.
Released: 2006-01-03
License: $99.95
Publisher: ELTIMA Software GmbH
Language: English
Platform: Windows
Requirements: Windows 98 and higher
Install: Install and Uninstall
|
Very good but overpriced My title says it all. The program works excellent, it even has proper handling for CTS/DTR and Carrier Detect.
It also pushes the data throuh at...
Ehhhh not bad. would be more useful if it was cross-platform.
| HsTcp2Com 1.1 |
|
HsTcp2Com is a communications application for Windows which allows to forward / bridge data between serial ports (RS232, bluetooth, IrDA, USB) represented as COM ports and TCP/IP connections or UDP/IP links. In the simplest scenario it is an COM port to TCP/IP converter, but it can bridge data between any combination of COM and UDP or TCP ports, with TCP ports in either client or server modes
Released: 2008-03-24
License: $155.00
Publisher: Hillstone Software
Language: English
Platform: Windows
Install: Install and Uninstall
|
| Serial Port Redirector 1.4.13 |
|
Serial Port Redirector is used to connect a serial application to a remote TCP socket. This allows you to utilize modern hardware COM servers without changing your software or exchange data between a TCP/IP application and an old-fashioned program that can only connect to a serial port. This is done by creating virtual COM ports. Virtual COM ports accept connections from serial applications and redirect the data to a specified IP address/port.
Released: 2006-12-21
Last Updated: 2008-05-14
License: $99.95
Publisher: FabulaTech, Inc.
Language: English
Platform: Windows
Requirements: none
Install: Install and Uninstall
|
| SkPortScan ActiveX Control 5.0.0.8 |
|
SkPortScan ActiveX Control is a lightweight, intelligent, and powerful port scanner control.
It allows developers to integrate port-scanning capabilities into their applications.
SkPortScan can be used for network exploration or security auditing.
SkPortScan can determine what services (ports) are open (offered) by remote hosts.
It is capable of scanning multiple hosts simultaneously.
Released: 2006-05-18
License: $295.00
Publisher: Magneto Software
Language: English
Platform: Windows
Install: Install and Uninstall
|
| DEKSI Modem Pooling 1.4 |
|
DEKSI Modem Pooling (DMP) is an advanced, powerful, and feature rich client-server software system that allows you to use any serial (COM) port on a remote computer from your local computer via a TCP/IP network connection. Sharing COM ports means sharing resources like modems, ISDN adapters, X.25 PADs or any device that connects to a COM port. With DEKSI Modem Pooling you will save money on unnecessary hardware costs.
Released: 2008-03-20
License: $199.00
Publisher: DEK Software International
Language: English
Platform: Windows
Requirements: 256MB RAM
Install: Install and Uninstall
|
| Network Serial Port Kit 5.3.2 |
|
You can connect data collection serial devices: bar code scanners, modems, sensors, gages, RF equipment, telephone PBX systems, laboratory or industrial instruments, and so on - to the serial ports of your computer to deliver that data anywhere over any TCP/IP based network. Program creates up to 254 virtual serial ports at a time. Physical COM ports located on remote computer can be connected to host computer over the network as well.
Released: 2006-12-21
Last Updated: 2008-05-14
License: $199.95
Publisher: FabulaTech, Inc.
Language: English
Platform: Windows
Requirements: none
Install: Install and Uninstall
|
| Eltima Serial to Ethernet Connector 4.1 |
|
Allows you to share up to 255 serial port devices over TCP/IP network turning your computer into low-cost terminal server. As the result, any serial port device connected to COM port could be accessed from anywhere in the world as if it is attached to local PC. It provides the ability to create four different types of connection: Port-to-port, Port-to-TCP client, Port-to-TCP server and Port-to-UDP.
Released: 2007-06-27
Last Updated: 2008-07-08
License: $99.95
Publisher: Virtual Serial Port Software
Language: English
Platform: Windows
Requirements: Processor: Pentium II class at least 200 MHz; RAM: 64 MB; Disk Space: 3-5 MB of initial free disk sp
Install: Install and Uninstall
|
| SwitchInspector 1.3.1 |
|
SwitchInspector is an easy to use application that assists you with the design, validation and auditing of your Local Area Network. SwitchInspector provides an easy and effective way to inspect a Cisco LAN switch and report which network devices are connected to each switch port. Therefore it solves the problem of having to trace cables in order to see which port is a network device connected to.
Released: 2005-04-05
License: $99.00
Publisher: Netxar Technologies Inc.
Language: English
Platform: Windows
Requirements: Windows 98 or greater
Install: Install and Uninstall
|
| COM port utility ReMapPro 2.7 |
|
The main utility, the Comport, is included in the ReMapPro package makes serial (RS232) data from your PC available on TCP/IP-based networks and makes TCP/IP data available on serial ports on your PC. This makes it possible for any other computer on the same network to send and receive serial data through a remote serial port on the PC where the Comport is running. You can connect to the remote serial port by connecting to a TCP/IP port.
Released: 2006-06-29
Last Updated: 2008-07-06
License: $100.00
Publisher: Labtam Inc.
Language: English
Platform: Windows
Requirements: A standard 386, 486 or Pentium 32 MB RAM 8 MB free hard disk space Mouse Unit
Install: Install and Uninstall
|
| datAxe TCP IP serial data converter 1.3 |
|
datAxe is a software program designed to convert serial (RS232) data to the TCP/IP packets format and TCP/IP packets to serial data. While running on your PC, datAxe can receive serial data from a COM port of your PC and then send them out to a TCP/IP network through a TCP/IP socket connection on your PC. datAxe can also receive serial data from a TCP/IP network through a TCP/IP socket connection and send them to a serial port on your PC
Released: 2006-07-13
License: $100.00
Publisher: LabF
Language: English
Platform: Windows
Requirements: 386, 486 or Pentium,16 MB RAM,25 MB free hard disk space, Win 9x/ME/NT4/2000/XP
Install: Install and Uninstall
|
|
Audio & Multimedia
port